High-power lasers in energy engineering (Osaka, 1-4 November 1999)Mima, Kunioki; Kulcinski, Gerald L; Hogan, William et al.SPIE proceedings series. 2000, isbn 0-8194-3484-1, XII, 736 p, isbn 0-8194-3484-1Conference Proceedings

Energy efficient laser machining = Usinage au laser: procédé à faible consommation en énergieLI, L. J; MAZUMDER, J.Lasers in manufacturing. International conference. 1985, pp 23-36Conference Paper

Focal point location in laser machining of thick hard woodTAYAL, M; BARNEKOV, V; MUKHERJEE, K et al.Journal of materials science letters. 1994, Vol 13, Num 9, pp 644-646, issn 0261-8028Article

Laser system for micromachining of the materialsBARBUCHA, R; KOCIK, M; MIZERACZYK, J et al.Proceedings of SPIE, the International Society for Optical Engineering. 2007, pp 65980J.1-65980J.5, issn 0277-786X, isbn 978-0-8194-6734-8Conference Paper

Realization of a uniform circular source using a two-dimensional binary filterKARIM, M. A; HANAFI, A. M; HUSSAIN, F et al.Optics letters. 1985, Vol 10, Num 10, pp 470-471, issn 0146-9592Article

On the signals generated by lead zirconium titanate (PZT) ceramics when irradiated with microsecond pulsed TEA-CO₂ laser pulsesVOICU, L; STAMATESCU, L; HENING, A et al.Physica status solidi. A. Applied research. 1985, Vol 91, Num 2, pp K103-K106, issn 0031-8965Article

A study of the problem of propagation and focusing of laser radiation in an apertured «super-Gaussian» formDUBIK, A; SARZYNSKI, A.Journal of Technical Physics. 1984, Vol 25, Num 3-4, pp 441-455, issn 0324-8313Article

Lensless focusing of hypergeometric laser beamsKOTLYAR, V. V; KOVALEV, A. A; SOIFER, V. A et al.Journal of optics (Print). 2011, Vol 13, Num 7, issn 2040-8978, 075703.1-075703.6Article

L. B. D. E. - Laser Beam Drilling Efficiency Unit: the DaudDAURELIO, G.Proceedings of SPIE, the International Society for Optical Engineering. 2010, Vol 7751, issn 0277-786X, isbn 978-0-8194-8242-6, 77511H.1-77511H.14Conference Paper

Laser photonics project designDAVIES, Ray.Proceedings of SPIE, the International Society for Optical Engineering. 2005, pp 551-557, issn 0277-786X, isbn 0-8194-5812-0, 1Vol, 7 p.Conference Paper

Conical and volumetric laser beams in laser technologiesCHIVEL, Yu; KHILO, N.Proceedings of SPIE, the International Society for Optical Engineering. 2011, Vol 7996, issn 0277-786X, isbn 978-0-8194-8569-4, 79960B.1-79960B.4Conference Paper

Laser-chemical finishing of micro forming toolsSTEPHEN, Andreas; GERHARD, Christoph; VOLLERTSEN, Frank et al.Proceedings of SPIE, the International Society for Optical Engineering. 2011, Vol 7921, issn 0277-786X, isbn 978-0-8194-8458-1, 79210J.1-79210J.6Conference Paper

Micromachining technology for micro-optics and nano-optics V and Microfabrication process technology XII (22-24 January 2007, San Jose, California, USA)Perez-Maher, Mary Ann.Proceedings of SPIE, the International Society for Optical Engineering. 2007, issn 0277-786X, isbn 978-0-8194-6575-7, 1Vol, various pagings, isbn 978-0-8194-6575-7Conference Proceedings

Study of voluminal defects observed in laser spot welding of tantalumGIRARD, K; JOUVARD, J. M; NAUDY, Ph et al.Journal of physics. D, Applied physics (Print). 2000, Vol 33, Num 21, pp 2815-2824, issn 0022-3727Article

Filament-induced laser machining (FILM)KISELEV, D; WOESTE, L; WOLF, J.-P et al.Applied physics. B, Lasers and optics (Print). 2010, Vol 100, Num 3, pp 515-520, issn 0946-2171, 6 p.Article

A simple optical device for measuring free surface deformations of nontransparent liquidsMEGALIOS, E. G; KAPSALIS, N; PASCHALIDIS, J et al.Journal of colloid and interface science. 2005, Vol 288, Num 2, pp 508-512, issn 0021-9797, 5 p.Article

The development of direct write technology in BAE systemsSIDHU, J; MCDONALD, J; MORGAN, S et al.Proceedings of SPIE, the International Society for Optical Engineering. 2006, pp 6315712.1-615712.6, issn 0277-786X, isbn 0-8194-6206-3Conference Paper

Conception et réalisation d'un système pour l'alignement automatique d'un faisceau laser CO₂ = Conception and realisation of a system for the automatic alignment of a CO₂ laser beamMARDON, Nathalie.1983, 158 p.Report

Laser-based micro-and nanopackaging and assembly (22-24 January 2007, San Jose CA, US)Proceedings of SPIE, the International Society for Optical Engineering. 2007, issn 0277-786X, isbn 978-0-8194-6572-6, 1Vol, pag. mult, isbn 978-0-8194-6572-6Conference Proceedings

Micromachining of complex channel systems in 3D quartz substrates using Q-switched Nd:YAG laserQIN, S.-J; LI, W. J.Applied physics. A, Materials science & processing (Print). 2002, Vol 74, Num 6, pp 773-777, issn 0947-8396Article

Laser-based micro- and nanopackaging and assembly V (25-27 January 2011, San Francisco, California, United States)Pfleging, Wilhelm.Proceedings of SPIE, the International Society for Optical Engineering. 2011, Vol 7921, issn 0277-786X, isbn 978-0-8194-8458-1, 1 vol, isbn 978-0-8194-8458-1Conference Proceedings

Laser technological system for precision 3D material treatment and inspectionVERKHOGLIAD, Alexander G.Proceedings of SPIE, the International Society for Optical Engineering. 2008, Vol 6985, pp 698507.1-698507.7, issn 0277-786X, isbn 978-0-8194-7183-3 0-8194-7183-6, 1VolConference Paper

Determination of waist parameters of a gaussian beamNEMOTO, J.Applied optics. 1986, Vol 25, Num 21, pp 3859-3863, issn 0003-6935Article

Laser scanning and recording: developments and trendsBEISER, L.Laser focus (1983). 1985, Vol 21, Num 2, pp 88-96, issn 0740-2511Article

Coherent combining of a 4 kW, eight-element fiber amplifier arrayYU, C. X; AUGST, S. J; REDMOND, S. M et al.Optics letters. 2011, Vol 36, Num 14, pp 2686-2688, issn 0146-9592, 3 p.Article